2 Best Free Software To Design Conveyor Belt For Windows

Here is a list of Best Free Software To Design Conveyor Belt For Windows. Using these freeware, you can design multiple conveyor belt systems. Though this list contains only two conveyor belt design software, both of them are good enough to create a good conveyor belt system design.

Talking about the design method, both of these software are easy to use. All the materials needed to create a conveyor belt system are provided. Place the objects on the workspace by drag and drop method and design the conveyor belt. You will find various kinds of materials to design a conveyor belt system. Some of these objects include Straight Conveyor, Curved Conveyor, Fluid Mixer, Fluid Blender, etc. Besides this, types of conveyor platforms are available in one of these software. These include X45H, X180, X180X, X300, X300X, XT, XTC, etc. conveyor platforms. In one of these software, you can also set the environmental conditions for a conveyor belt.

The 3 Dimensional View and Simulation of conveyor belt system are available in both of these software. You can view the design in 3D mode and simulate it. By running the simulation, you can analyze the performance of designed conveyor belt. In addition to this, you can also perform different calculations related to a conveyor belt design. Based on the simulation and calculated results, you can easily evaluate the conveyor belt design for its productivity. Check the article to know the details about all these features.

My favorite Software To Design Conveyor Belt:

FlexSim is my favorite software to design conveyor belt. This software is easy to use and also comes with a lot of materials to design a conveyor belt system. Some of these objects are conveyors, operator, dispatcher, elevator, staff, etc. It also lets you simulate the conveyor belt design. You can vary the speed of simulation.

You may also like some best free Race Track Design, Track Designer, and Gear Design software for Windows.

FlexSim



FlexSim is a free software to design conveyor belt for Windows. This software lets you design conveyor belt model in 3D mode.

It comes with a good number of conveyor belt materials for designing a conveyor belt system. All of these materials are available on the left panel of the software. In order to design conveyor belt system, simply drag the objects and drop them onto the workspace. You can move an object by using left click, rotate an object by using right click, and zoom in or out by using the scroll wheel of the mouse.

So that you don’t face any difficulty while finding a particular object for your conveyor belt design, all the objects are divided into different categories, have a look:

  • Fixed Resources: This section includes the parts of a conveyor belt system that generally remain fixed at one place. These objects include Source, Queue, Processor, Sink, Combiner, Separator, Multiprocessor, Rack, and BasicFR. Source and Sink are the start and end points of a conveyor belt system, respectively. Materials transfer from the source to the sink by passing through various processors.
  • Task Executers: This section includes the objects which are responsible to execute a task, like Dispatcher, Operator, Transporter, Elevator, Robot, Crane, etc.
  • Conveyors: Parts related to conveyors are available here, such as Straight Conveyor, Curved Conveyors, Conveyors Joining Tool, Station, Motor, etc.
  • Fluid: In this section, you will find Fluid Tank, Fluid Generator, Fluid Terminator, Fluid Blender, Fluid Mixer, Fluid Pipe, Fluid Conveyor, etc.
  • People: Transport, Equipment, Staff, etc. are provided in this section to be added to your project.

Apart from the above-listed objects, there are some more objects available in the software which you can use in your conveyor belt system, such as barrier, divider, bridge, people, etc. After placing all the objects, connect them with the help of Connect Tool available on the toolbar. You can edit the properties of any of the objects by double-clicking on the respective object. Different properties are available for different objects, let’s see.

  • For the source, you can change the arrival style (inter-arrival time, arrival schedule, and arrival sequence), flow item class (box, cylinder, sphere, circle, etc.), etc. You can also define where to send the flow item downstream (randomly, first available, etc.) and where to send the requests for transporting flow items.
  • For the processor, you can define the maximum content limit, objects set up time, objects process time, etc.
  • For the sink, you can change the recycling strategy like recycle to sphere, recycle to cylinder, recycle to palette, recycle to tote, recycle to circle, recycle to plane, etc. Besides this, Do Not Recycle The Flowitems option is also available.

Simulation of a conveyor belt system:

Click on Run button to start and Stop button to stop the simulation. By running the simulation, you can check whether the flow of products in a conveyor belt system is correct or incorrect. The speed of the simulation can be varied by the user with the help of a slider. It also provides a step simulation option to let you simulate design in step by step manner.

You can save your project in FlexSim Model and Tree file formats.

NOTE: In the free version of this software, you cannot access all of its features. Plus, the conveyor belt system model is limited to 30 products only.

Home Page      Download Page

FlexLink Calculation Tool



FlexLink Calculation Tool is another free conveyor belt design software for Windows. Using this free software, you can design different kinds of conveyor belts. Creating or editing more than one conveyor belt design simultaneously is also possible as it opens each new project in a separate tab.

Thanks to its simple user-interface, using this software is not a hard nut to crack. The entire interface of the program is divided into five parts, namely, Conveyor settings window, Components window, Layout window, 3D view window, and Result window. Let’s understand the working of each of these windows:

1. Conveyor settings window: As the name implies, this window includes the parameters to be set before you design conveyor belt. These parameters are divided into three categories:

  • Platform: Here, you can select the type of conveyor platform, chain, and slide rail for your conveyor belt design. A large number of platform types are available including X45, X45H, X180, X180X, X300, X300X, XT, XTC, WL222X, WL273X, WL322, WL424, WL626, etc. For each platform, different types of chains and slide rails are available. The chain weight (in kg.m) is displayed after selecting the type of platform and chain.
  • Product: This section requires details of the product you are going to use on the conveyor belt. These details include product weight (in grams), product length (in mm), required capacity (number of products per minute), conveyor speed (in m/min), and CoF product-chain (in μ). The CoF product-chain is basically the typical frictional values which are different for different materials. The Gap between the products is defined automatically by the software after entering all the aforementioned values.
  • Environment: Here, you can select the operating temperature, environmental conditions (dry, wet, lubricated, or dirty), starts/stops per hour, and starting slope of a conveyor belt.

2. Components window: All the components necessary to design a conveyor belt are available here. These components include Idlers, Beams, Plain Bends, Vertical Bends, Wheel Bends, Alpines, and Drive Units. The plain bends, vertical bends, wheel bends, and alpines are available at different angles and radii.

3. Layout window: Use this window to design conveyor belt system. Simply drag the components from the Components window and drop them here. As you start dropping the components in the Layout window one after the other, the components will be joined to one another automatically and the design will be available in the 3D View window. You can change the order of the components, which also changes the design of the conveyor belt.

4. 3D View window: This window displays the 3D view of a conveyor belt. You can move the design by using left click, rotate the design by using right click, and zoom in or out the view by using the scroll wheel of the mouse. You can also maximize the 3D view to the full screen. Simulation is a good feature of this conveyor belt design software. It simulates the products on the conveyor belt at the set speed.

5. Result: The result window shows the calculated data which include capacity, calculated tension, torque, power, conveyor length, chain length, etc.

After the completion of the design, you can save it in FlexLink FLCT files format or export it as PDF. Moreover, a Print option is also available in this conveyor belt design software.

Home Page      Download Page


Show Buttons
Hide Buttons